Cisco Multilink PPP DSL Configuration<p>
<pre>
Using 1642 out of 29688 bytes
!
version 12.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname concurrent
!
boot-start-marker
boot-end-marker
!
!
memory-size iomem 20
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no aaa new-model
ip subnet-zero
!
!
no ip domain lookup
!
ip cef
vpdn enable
!
vpdn-group pppoe
 request-dialin
  protocol pppoe
!
!
!
!
!
interface ATM0
 no ip address
 load-interval 30
 no atm ilmi-keepalive
 bundle-enable
 dsl operating-mode auto
!
interface ATM0.1 point-to-point
 pvc 8/35
  encapsulation aal5snap
  protocol ppp dialer
  dialer pool-member 1
 !
!
interface ATM1
 no ip address
 load-interval 30
 no atm ilmi-keepalive
 bundle-enable
 dsl operating-mode auto
!
interface ATM1.1 point-to-point
 pvc 8/35
  encapsulation aal5snap
  protocol ppp dialer
  dialer pool-member 1
 !
!
interface FastEthernet0
 ip address 209.150.59.177 255.255.255.248
 load-interval 30
 speed auto
 no cdp enable
!
interface Dialer1
 ip address negotiated
 ip mtu 1492
 encapsulation ppp
 dialer pool 1
 no cdp enable
 ppp authentication chap callin
 ppp chap hostname <radius_username>
 ppp chap password 0 <radius_password>
 ppp multilink
 ppp multilink links minimum 2
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
!
!
no cdp run
!
!
line con 0
line aux 0
line vty 0 4
 session-timeout 10
 exec-timeout 30 0
 login local
!
!
end
</pre>